Ork Kopta Karrier 4

The beast, it grows...

Indeed.

I added the inner track unit panels which allowed me to do the basic internal plating. This is quite plain as I do not know yet what will be seen. Until I do the uppr structure and deck I don't know where the lift will go and thus what internal walls etc will be added. I did the basic plating know though for ease.

As you can see I spaced out the one side as on that side will sit the superstructure up on the deck.

I added the rear extension of 20mm to match that done on the mock up as well.

As the inner track unit panels were in place I could finish off the underside of the hull:

Underside of the 20mm rear extension.

Detial shot of one side where the side panel has been added.

To end we have a scale shot of the Karrier thus far and a regular Baneblade hull...

Probably the next update on the Karrier will be Monday.

COMPETITION!

(copy and past job from the last post again.)

I have decided to run a competition revolving around the Karrier.

In the past while doing conversions people found it amusing if I kept a track record of the number of rivets I added, so I thought for this huge build I would do the same.

So the competition is this, you have a guess on the number of rivets I eventually add to the karrier with the person who is closest at the finish getting a Gun Emplacement kit as a prize.

However, to take part you will have to Follow this blog and post up your guess as a comment to this or the next post I do regarding the Karrier. You can change your mind providing you post your revised guess before those posts are surpassed by more updates.

After the posts open for guessing have passed I will do a running total.

* Notes - at the moment, depending how things go (i.e. if not much is shown in them) I may extend it.

** You may be thinking this is just a shameless plug for the blog attempting to get people to join in for a chance of a prize, and you would be correct.