Items for Sale and Commissions


Contact: rictusrd-blog (at) yahoo (dot) co (dot) uk


Gun Emplacement:


Each set contains:

Eight curved wall panels, two end walls pieces, twelve base pieces, three step pieces and a single gun mounting plate. One wall piece will have resin rebar pieces cast into it.

The wall pieces are cast in plaster allowing battle damage to be carved into them as desired, while the base pieces, steps and gun plate are cast in resin.

The central hole in the gun plate allows a FW Hydra or Manticore turret to be fitted or alternatively a cut down Earthshaker plate from the Basilisk kit can be cut down and fitted in place.

Mock ups using a FW turret and an Earthshaker

One kit costs £25 + postage at cost
Two kits cost £45 + postage at cost
Three kits cost £65 + postage at cost

Contact: rictusrd-blog (at) yahoo (dot) co (dot) uk


Dragons Teeth Tank Traps:


The Dragons Teeth are cast in resin as a set of nine. They come showing various states of damage as shown above.


When based they look something like this:


An example below shows about four sets based. In total the four sets give you about 1.5 metres of tank traps.


Each set costs £4.50 + postage at cost

Contact: rictusrd-blog (at) yahoo (dot) co (dot) uk


Terrain Pillar Moulds:
CURRENTLY ON HOLD


Above shows the master model used to make the Pillar Moulds. The pillars can be used to create cheap and modular gaming boards using card (or styrene) as walls and doors which slot into the pillars.



And showing some cast pieces with the walls and doors in place:

1mm card was used for the walls

While thicker Finnboard was used for the doors.
The pillars can be cast in either resin or plaster, however plaster is far cheaper (approx £25 for 10kg).

You will need in the region of 30-60 pillars to make a board depending on the size you go for. The example below (using the first version of the pillar) shows a board set up for Zone Mortalis.


Pillar Moulds in all their blue glory.

£30 for one pillar mould + postage at cost.
£55 for two pillar moulds + postage at cost.


DUE TO A LACK OF TIME I'M NOT DOING ANY OF THE PILLAR MOULDS.

Contact: rictusrd-blog (at) yahoo (dot) co (dot) uk



While I am open to convert anything for people my main area for commission work is Orks.

Here are some examples of commission pieces.

Mekboy Junka. Right - a break down of the parts.



Combo kit - can be fielded as either a Mekboy Junka (left)
or a Looted Wagon (right)

Looted Wagons built from Leman Russ Tanks:




To see more of these (and other Ork conversions) use the Ork tag on the Recalcitrant Daze Blog Home Page.

Right, while I am keeping the Commission Area on the page I am not currently doing any commissions. It just uses up too much of my time. However if someone comes up with a really interesting idea I may be persuaded to do one...


Please contact me at the email address below if you would like to pick up any of the items above.

Contact: rictusrd-blog (at) yahoo (dot) co (dot) uk

6 comments:

  1. how many pillars do you get for the 33pounds?

    ReplyDelete
    Replies
    1. Hi, I'm not selling any pillars. I am selling the mould which can be used to cast up as many pillars as needed.

      Cheers.

      Delete
  2. Hi! I would like to purchase one of the moulds, can you please contact me at armel.nicolas@gmail.com ?

    ReplyDelete
  3. Hi, I would like to purchase on of the pillar molds. Please contact me at gary.rowe@telesistech.com

    ReplyDelete
  4. Hi, I'd like to buy a couple of the pillar mounds please. You can reach me at ceriscanlon@gmail.com.

    Hope to hear for you soon

    ReplyDelete
  5. sorry if this is not where you are supposed to ask but i would like to buy some molds you can contact me at pjod1995@gmail.com

    ReplyDelete