Thursday, 3 July 2014

Blessings of the Plaguefather - Blight Drone II - 3

It has been a while since I did anything to the second Blight Drone.

So let us rectify that now.

I've added all the cables. I also added a little GS to the carapace, partly because I had some mixed up and partly because it will help tie it in with the Decimator and Plague Hulk. Even though I remodelled the rear end and the cables have a different configuration the GS on the front will give an instant visual difference between the two Blight Drones.





I also put together the four fans, I'll paint these separate before gluing in place.


The ruin on the base had some attention from the Dremel I also filled in the odd gap with GS.


That's all for tonight.

4 comments:

  1. Lovely!
    I wish I could do a second blight drone, but I ended exhausted with the first one (and yet with details to finish...).

    ReplyDelete
    Replies
    1. Cheers.

      It'll be worth having a rest then jumping in with a second. They are great models.

      Delete
  2. Wow...the drone model is incredible. Such detail!

    Are the ruins the resin pieces they normally sell on ebay?

    ReplyDelete
    Replies
    1. No, the ruins are casts I have done of the old 3rd edition ruins set that came in the starter box.

      Delete